Boating Safety – Bilge Pump Rule
What is the purpose of a bilge pump?
According to legend, the first bilge pump was invented by a terrified sailor. He had to save a ship that was taking on water, armed only with adrenaline and a bucket. Bilge pumps, thankfully, are now efficient electrical devices that do not require manual ‘bailing.’ Sensors in modern pumps start the pump when it’s needed and turn it off when the water is gone.You may want to check out https://medium.com/@merritt_supply/if-you-do-not-know-what-a-bilge-pump-is-read-on-854a5e17b630 for more.
The purpose of a bilge pump is to remove water from the bilge. You might be wondering what a bilge is. The bottom of the boat, below the lowest floor and down to the hull, is known as the bilge. Water collects here, which is frequently mixed with sea debris and oil/fuel. To prevent the water/oil mixture from bursting into flame, Rule’s pumps are designed to not spark.
The electric submersible pump is by far the most popular of the many types of bilge systems available. They’re simple to set up, requiring only a battery and piping to discharge the water. Rule pumps are designed to run dry for up to two hours if a sensor fails or the pump switch is left on. A float switch is recommended to avoid premature pump burnout because it prevents the pump from running when there is no water in the bilge.
The Rule brand is owned by the Xylem company. They are the world’s leading company in the field of water technology. For more than 70 years, Xylem has been manufacturing pumps and other components for the marine industry. The efficiency and durability of Rule’s products are well-known.
It is important to purchase high-quality pumps that will not let you down. It might sound exaggerated, but a dependable, powerful pump could save your life one day. When it comes to flooding, the bilge pump is normally the first line of protection, and it will give you more time to respond in an emergency.
What are my choices for a pump?
Before making a purchase, you can ask a lot of questions. Which do you prefer: automatic or manual? Will it be operated by a float or a panel switch? How many pumps would you need, and how many bilge sections is your boat equipped with?
The size of your vessel will decide how many pumps you’ll need and how much water the machine can accommodate. GPH, or gallons per hour, is the unit of measurement for the amount of water moved by a pump. Rule manufactures a wide range of pumps in a number of sizes. They range in size from 360 to 8000 gallons per hour. It’s a smart idea to have more than one bilge pump on hand in case of an emergency. A backup pump will save your boat from flooding if the primary pump fails. Redundancy allows boat owners peace of mind when they’re far from dry land.